If you use an ATV to get to your hunting spot, you know the struggle of hauling a long gun or bow over rough terrain. Bouncing down a trail with a rifle across your lap is neither safe nor practical, and throwing it in the back of a side-by-side invites scratches and worse. The Graspur Double ATV Gun & Bow Rack (Model ATV2) aims to solve that by mounting two firearms or a bow securely to your front or rear rack. After spending a few weeks with it on a mix of forest roads and rocky two-tracks, it’s clear this is a purpose-built piece of gear—but it’s not without a few compromises.
The rack itself is a welded steel frame with a dark powder-coated finish. It’s designed to clamp onto the square tubing of most ATV front and rear racks, and it uses rubber-padded jaws to hold whatever you’re carrying. The clamping mechanism is straightforward: you position the rack, tighten the bolts, and it stays put. I mounted mine on the front rack of a Honda Foreman, and the installation took about fifteen minutes with basic hand tools. The instructions are minimal but adequate, and the hardware feels substantial—no cheap wing nuts or flimsy brackets here.
In practice, the Graspur does what it promises. The two cradles are spaced wide enough to accommodate a scoped rifle and a shotgun side by side, or you can swap the upper cradles to hold a bow. The rubber lining grips the stock and barrel without marring finishes, and the retention straps—which are included—keep everything from bouncing out on aggressive terrain. I tested it with a scoped .308 and a compound bow, and both stayed rock solid over a series of washboard bumps and a few steep inclines. The rack’s design also keeps the firearms elevated above the ATV’s rack, which means less mud and debris kicked up by the tires.
One of the standout features is the rotational adjustment. The rack can be tilted to keep your guns upright even when the ATV is parked on a slope. That’s a nice touch for hunters who glass from a ridge or need to prop the machine at an angle. The pivoting joint locks down with a lever, and it held firm during my testing—no sagging or creeping. For bow users, the included bow adapter is a simple U-shaped rest that holds the riser, and it works well with most compound bows I tried, though crossbows are a different story (more on that below).
That said, there are limitations. The most obvious is weight capacity—Graspur rates it for 50 pounds total, which is fine for two rifles or a single bow, but if you’re carrying a heavy muzzleloader plus a shotgun, you’ll be near the limit. The rack also adds noticeable bulk to the front of the ATV. On tight trails, I clipped a few low-hanging branches that I wouldn’t have hit otherwise, and the steel frame does block a small portion of your forward view if mounted up front. Rear mounting solves that, but then you have to reach behind you to grab a gun, which is less convenient.
Another trade-off is that the rack is not quick-release. Once it’s bolted on, it’s on—you’re not going to pop it off in seconds to switch between hauling gear and hauling game. If you use your ATV for chores during the off-season, you’ll likely want to remove it, and that’s a 10-minute job each time. Also, the rubber padding is durable but not replaceable; if it wears out after a few years of heavy use, you’ll be buying a new rack rather than just new pads.
Compared to soft cases or a simple gun boot that straps to the rack, the Graspur is a more permanent and secure solution. A gun boot offers better weather and dust protection, but it’s a hassle to slide long guns in and out, and it doesn’t work well for bows. The Graspur is faster to access and holds both types of equipment, but it leaves your firearms exposed to the elements. For a quick ride to a stand on a dry day, that’s fine. For an all-day ride in rain or snow, you’ll want to add a cover or use a case.
Who is this for? Hunters who regularly use an ATV to access their hunting areas and want a reliable, no-nonsense way to carry a rifle or bow will appreciate the Graspur. It’s also a good fit for ranchers or property owners who need to haul a firearm while checking fences or feeders. It is not ideal for those who need to switch between carrying guns and hauling cargo frequently, nor for crossbow users—the bow adapter isn’t designed for the wider limbs of a crossbow, and the weight limit will be a problem for some models. If you only hunt from a truck or side-by-side with an enclosed cab, you’re better off with a simple vertical gun holder inside the vehicle.
At its price point, the Graspur Double ATV Gun & Bow Rack is a decent value. It’s not the cheapest option, but it’s built to last, and the security it provides is worth the cost for serious ATV hunters. Just be aware of its limitations before you buy—it’s a dedicated tool, not a multipurpose solution.