If you own a Blink Video Doorbell (2nd Gen), you already know the routine: every few months, the doorbell needs to come down for charging. Depending on where you mounted it, that can mean unscrewing a bracket, bringing the unit inside, plugging it into a micro-USB cable, and waiting hours for a full charge. The 2-in-1 Doorbell Power Adapter with Charging Cable and Doorbell Mount aims to simplify that process by combining a mounting bracket with a continuous power supply. Instead of relying on the internal batteries, you can keep the doorbell powered indefinitely, provided you have an outlet within reach of its 16.4-foot cable.
The kit includes three main pieces: a replacement mounting bracket, a power adapter that plugs into a standard wall outlet, and a 16.4-foot extension cable. The bracket is designed to hold the Blink Video Doorbell (2nd Gen) securely while allowing the charging cable to pass through. The power adapter outputs the necessary voltage to charge the doorbell, and the long cable gives you flexibility in routing. Installation is straightforward: you remove your existing doorbell from its mount, attach the new bracket to your wall or doorframe using the included screws (or adhesive, if you prefer), connect the charging cable to the doorbell’s micro-USB port, and plug the other end into an outlet. The doorbell then stays charged without any further intervention.
In real-world use, this setup is most appealing for people who have an outlet near their front door—perhaps in a porch, garage, or entryway. If you fall into that category, the convenience is undeniable. You no longer need to remember to recharge the doorbell, and you can access live view or recordings without worrying about battery drain. The 16.4-foot cable is generous enough to reach most standard installations, but it’s not unlimited. If your nearest outlet is farther than that, you’ll need an extension cord, which can add clutter and may not be weather-resistant. Also, the cable itself is not rated for outdoor use in extreme conditions; while it can handle typical rain and sun, prolonged exposure to harsh weather might degrade it over time. That’s a trade-off worth considering if your doorbell is fully exposed to the elements.
Compared to simply using rechargeable batteries, this adapter eliminates the recurring chore of charging. It’s similar in concept to hardwired doorbell transformers, but it doesn’t require any electrical work—just a nearby outlet. However, unlike a true hardwired setup, you’ll have a visible cable running from the doorbell to the outlet, which some may find less aesthetically pleasing. Another alternative is a solar charger, but those depend on sunlight and can be unreliable in shaded areas. This adapter provides consistent power as long as the outlet works.
One limitation is that the mount is specifically designed for the Blink Video Doorbell (2nd Gen). If you have a different model or brand, this won’t fit. Also, the bracket replaces your existing mount, so if you’ve customized your setup or use a different angle, you’ll need to adjust. The charging cable is micro-USB, which is an older standard; if you prefer USB-C, you’ll need a different solution. Additionally, the power adapter itself is not weatherproof, so it must be plugged into an indoor outlet or a covered outdoor one. That might limit placement options.
Who is this for? It’s ideal for Blink 2nd Gen owners who have an outlet within 16 feet of their doorbell and want to avoid battery swaps. It’s also good for renters who can’t hardwire a doorbell but can run a cable to an outlet. It’s not for those with outlets far away, those who want a completely wireless look, or those with extreme weather exposure. If you fall into the latter groups, you might be better off with a spare battery and a charging dock, or a different doorbell that supports hardwiring.
In terms of build quality, the mount feels sturdy enough for typical use, though it’s mostly plastic. The cable is a standard gauge, and the power adapter is compact. It doesn’t feel premium, but it doesn’t feel flimsy either. For the price, it’s a reasonable solution if it fits your situation. Just measure the distance to your outlet before buying, and consider how you’ll route the cable to avoid tripping hazards or unsightly draping.
Overall, the 2-in-1 Doorbell Power Adapter is a niche product that solves a specific problem: keeping a Blink doorbell charged without manual intervention. It’s not a universal fix, and it won’t work for everyone, but for those with a convenient outlet, it’s a practical upgrade that can save time and hassle.